-
I get the follwing error when trying to build for the Malayan 200, following https://github.com/MarlinFirmware/Configurations/tree/bugfix-2.0.x/config/examples/Malyan/M200 to the letter. This happens …
-
TFT screens with optional touch panel can be used to control Marlin
Low-level IO uses DMA for background data transfer to TFT screen to minimize impact on Marlin's performance.
Current low-level I…
jmz52 updated
3 years ago
-
Howdy All,
I am replacing my Ultimaker v2.1.4 board with SKR v1.3 w/TMC2208 UART. I am not able to connected any Win10 PC to the SKR board via USB after re-flashing to Marlin 2.0bugfix. Getting a …
-
Hi,
So I'm currently trying to replace my Creality CR10 S5's motherboard with a SKR 1.4 Turbo. I purchased this along with TMC 2208 v3 Drivers. So far I've got most things working, from the motors …
-
Board|MCU|State|To-Do
-|-|-|-
8-Bit AVR boards, RAMPS, etc.|Arduino AVR|💚good|
Due, RAMPS FD (v2.A!), etc.|SAM3X8E|💚good|
Duet Wifi + X5|SAM3X8E|❓unknown|E3D Toolchanger on hand
Duet 2 Maestro|SA…
-
Using Debian Buster, Marlin at commit c28e08c8, running an SKR v1.3 with a brand new RRD 12864 display (BigTreeTech red PCB model with contrast pot, via normal cables that needed no twisting/flipping/…
-
This is Marlin bugfix-2.0.x branch, commit 61225e68, running on an SKR v1.3.
### Description
For a while, I've been having problems with my hotend staying... well... hot. At the beginning of a …
-
For people with "all metal hotend" might like to have an option from the DWIN LCD interface to change the hotend temperature to 300C or for those with modified heatbed to set temperatures to let say 1…
-
My BLTouch works perfectly and deploys and retracts on command but during g28 it will not deploy
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinF…
-
I cannot get the GTR firmware to compile using ATOM, or VSCODE, the guide that the documentation refers to is for another board entirely, I spent 70 bucks getting this thing to me and I'm very offset …