-
-
SK 3/4/2017-Calculate the max speed based on the 28BYJ-48. Datasheet listed below.
http://robocraft.ru/files/datasheet/28BYJ-48.pdf
-
Hardware SPI works fine using :
`TMC2660Stepper driver = TMC2660Stepper(CS_PIN, R_SENSE);`
using :
`TMC2660Stepper driver = TMC2660Stepper(CS_PIN, R_SENSE, SW_MOSI, SW_MISO, SW_SCK);`
doesn't wor…
-
Hello, i have a Client RP2040 board with the ConfigurableFirmata v3.0 library installed on it, and an Python script using Perl-Firmata server side firmata library running on a PC via USB.
They both c…
-
Hello, I have some misconfiguration and i hardly guess what is wrong
I can run accelstepper example on 2,3,4,5 pin with a stepper motor and a 4 input l298n controller.
But the linuxcnc cant move my m…
g1ra updated
10 years ago
-
my code is only working in one direction. What do you think would cause this? The dir pin seems to toggle and even if it didn't wouldn't the motor just keep going the same direction ignoring a toggl…
-
I noticed that none of the `sendOneWire*` methods are currently documented. I'm going to try and get around to documenting these soon, but I wanted to get this written down in case I forget/get too bu…
-
## Issue template
- Hardware description: ESP32 DEVKIT V1
- RTOS: None
- Installation type: This repo, PlatformIO
- Version or commit hash: jazzy
#### Steps to reproduce the issue
Use…
-
I need to use your library with 8-bit Arduino Uno / ATmega328. I took a quick look at your code, and it looked like this is meant for a different platform. Can you please confirm if this will or will …
csurf updated
5 years ago
-
Does this library support the RP2040? I could not find anything in the code that suggests it doesn't, but would prefer to have a solid answer.
Thanks