-
Hello,
Do you know how to use the 4 x Motor Driver Outputs on the BeagleBone Blue with the Ardupilot image and Mission Planner?
I would like to deploy on a DFRobot Devistator Robot Chassis, a skid…
-
Design Everything in the Vehicle (Spinning Cylinder). Electronics, Flywheel, and Power.
-
```sh
debian@beaglebone:/var/lib/cloud9$ rc_test_motors -s 0.3
ERROR in rc_pwm_init, can't open pwm unexport file for writing: No such file or directory
Probably kernel or BeagleBone image is too o…
-
Hello, I have reactivated a BeagleBoneBlue that was catching dust on my shelf and while updating the kernel
via
`sudo /opt/scripts/tools/update_kernel.sh --lts-5_4`
I found out that librobot…
-
I have a program that runs fine from the command line of my PC when connected via WiFi to my BBBlue Diff-Drive robot. I can use the Pause button on the board to start and stop the robot (code is from…
-
## Describe the bug
Not sure it is hardware(board) related. I use beaglebone blue.
Checkout V1.13.1, same issue
Checkout current main tip. QGroundControl display:
Parameters are missing from firmw…
-
```sh
debian@beaglebone:/var/lib/cloud9$ sudo rc_test_encoders
Bus error
debian@beaglebone:/var/lib/cloud9$ dmesg | tail
[ 36.198324] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ …
-
## Describe the bug
This is an issue found when testing alt/Position modes on 220 frame quad. Found on release/1.13
The FC is a Beaglebone Blue, but the issue could also persist on other autopilot…
-
Just wanted to report that I've had some issues with the ofxDMX addon recently.
I've been using this device together with an Enttec DMX Usb Pro:
http://www.enttec.com/?main_menu=Products&pn=71003
Th…
-
The connector that plugs inside is not retained. By vibrations, this connector comes out and this is particularly dangerous in the context of a flight controller (our project).
- **Therefore we re…