-
So my idea is to use a hoverboard motor to create a direct drive race wheel. In the basics I got it working. I use an ATMEGA32u4 to connect to the PC as an Joystick device and i'm getting the force fe…
-
Thank you so much for this great project! I've spent way too much time on microcontrollers, 3dprinting and cnc'ing (MPCNC), for my wifes liking. When I came across this, she was very happy about a pro…
-
Hello dear I'd like to do galvolaser and ı need to read gcode. My project need 2 axis x and y so how can ı use grbl
-
This board from Classy Walk hoverboard and has a GD32F130, FORTIOR FD6287T GA1015 and a NCE01P13K 1PKL2. It's marked with OLSZ 0L20190703-V4.1
## Master
![P_20240825_205058](https://github.com/use…
-
Hi,
I'm from University of Michigan, I have a VESC 6 MKiv and im using it for my autonomous car research project. My current implementation is similar to the F1Tenth and MIT-racecar repositories and…
-
Successfully replaced two mosfets today :-/
Would be great for this firmware if it could be made safer (than other firmwares ?)
**1. lose current phase cables:**
I learned (the hard way) that los…
-
I'm trying to model the Parrot Bebop 2 and I was wondering if a mathematical model already exists.
If not, I want to model the Bebop 2 through solving a parameter optimization. To do this, I nee…
-
### Summary
Currently, the PID controller implements basics from Adrian Rosebrock's blog post [Pan/tilt face tracking with a Raspberry Pi and OpenCV](https://www.pyimagesearch.com/2019/04/01/pan-ti…
-
Hi, what kind of mega shield I'll have to use to make it run?
Are you using rams 1.4 or some custom pcb?
-
![IMG_20240201_211838](https://github.com/RoboDurden/Hoverboard-Firmware-Hack-Gen2.x/assets/142502122/80b43cf5-351d-4eae-a1f6-c1d215507099)
![IMG_20240201_211912~2](https://github.com/RoboDurden/Hove…