-
This idea came from developer discussion between zigpy-znp developers in https://github.com/zha-ng/zigpy-znp/issues/10
Would it be possible to script a "backup and restore" migration feature/functi…
Hedda updated
3 years ago
-
What do you think about also providing a pre-configured Zigbee router firmware image for the IKEA Trådfri ICC-A-1 Module?
Checkout Ikea Tradfri Zigbee Repeater Umbau project with Zigbee router fir…
Hedda updated
3 years ago
-
```
您好,
感谢西北工业大学无线传感网的相关工作人员,同时也感谢您们的开源精神!
请问如下几个在CC2420下使用的components,在移植后CC2530文件中那些函数与之相对应?
components CC2420PacketC
command uint8_t getLqi(message_t *p_msg)
command uint8_t getPower(m…
-
```
您好,
感谢西北工业大学无线传感网的相关工作人员,同时也感谢您们的开源精神!
请问如下几个在CC2420下使用的components,在移植后CC2530文件中那些函数与之相对应?
components CC2420PacketC
command uint8_t getLqi(message_t *p_msg)
command uint8_t getPower(m…
-
Hi,
Where can i buy it ? :-)
-
```
您好,
感谢西北工业大学无线传感网的相关工作人员,同时也感谢您们的开源精神!
请问如下几个在CC2420下使用的components,在移植后CC2530文件中那些函数与之相对应?
components CC2420PacketC
command uint8_t getLqi(message_t *p_msg)
command uint8_t getPower(m…
-
I may need some help fleshing this request out.
The TICC253X is an 8051 SOC. that with the zstack will support Zigbee, with some higher-level commands to create coordinators, routers, and end devic…
-
@JelmerT Requesting this now as @puddly posted in https://github.com/zha-ng/zigpy-znp/issues/14 saying that he implemented the MT command based serial bootloader protocol ([f67e8a4](https://github.com…
Hedda updated
4 years ago
-
I loaded the latest firmware to a CC2350+2195 but cannot get the temperature sensor to work. I tried router and enddevice firmware and connected a ds18b20 sensor to P0_7.
Zigbee2MQTT:info 2021-05-…
-
Requesting this now as zigpy-znp developer puddly posted in https://github.com/zha-ng/zigpy-znp/issues/14 saying that he implemented the MT command based serial bootloader protocol ([f67e8a4](https://…
Hedda updated
3 years ago