-
I have installed on my Arch Linux the cynthion version 0.1.2. During the
execution of update coomand I get errors. Here is the output from my terminal:
[user]~> cynthion setup —check
Checking: Linu…
-
I ran into a few problems when following the guide "Programming the iCE40" more specifically the "Using APIO" section on the website.
Maybe they are because I'm working on a Mac (Intel Version)
…
-
I'm running the most up-to-date versions of flutter as well as versions of this package.
I'm making my call like this:
```
onPressed: () async {
final notifier =
…
-
If DFU_SEAL_LEVEL != 0 i recive state(10) = dfuERROR, status(4) = Memory erase function failed.
What i do wrong ?
cpu stm32f103c8
dfu-util -v -d 0483:df11 -D outfile.bin 0x8002000
dfu-util 0…
-
**DFU Bootloader version (please complete the following information):**
- SDK version: 17.0.2
- Bonding used: no
- Library version: 4.10.4
**Device information (please complete the following …
-
Hello,
I like your keybon very much, I made one too, but I don't know how to use tx/rx to burn my board,
For bl, I chose to use stlink, I flew dio and clk on the board, which allowed me to flash the…
-
can't select DFU Package on icloud files
![IMG_2885](https://github.com/user-attachments/assets/ed927678-ae10-425b-83f1-4b161e5ea8a7)
iottq updated
1 month ago
-
### Describe the problem
When I have two Arduino Nano ESP32's attached to my Mac, I am unable to upload via `arduino-cli upload`. The `dfu-util` cannot figure out which device is which without a `--s…
-
## Bug report
COM-port does not come up after flashing. Windows receives no device description.
Version v4.4.4 (copter) is working fine!
I do not want to try the ardupilot bootloader for the…
-
Good day.
I can get the cb1 to boot but the firmware.bin is never picked up by the sdcard reader. I've tried DFU mode but it always errors out:
`biqu@BTT-CB1:~/klipper$ sudo dfu-util -a 0 -D ~/…