-
The example string "You Shouldn't Have Unsoldered This" rendered as follows:
![you_shouldn_t_have_unsoldered_this-1 3x fp](https://cloud.githubusercontent.com/assets/2698890/23186475/57e0c92a-f898-11…
-
This is the blanket g-code support ticket. G-code is a huge thing, not completely standardized, and adjusted on an application basis. It makes sense to support it for software that creates gcode that …
-
Hi i want to apologize that i am creating this as an issue.
But i have a question. I am trying to use your firmware (from master branch), with small modification (changed only PINs and small modifica…
-
All the modes use their own somewhat unintuitive buttons for pen/brush control that are intended to be used for debugging & calibration, and really every mode needs some kind of method of doing this i…
-
It would be so so so nice to have a single app that a user could download and run, on Win, Mac and Linux, that would do the following:
0) When doubled clicked, expand the necessary pieces into a temp…
-
T#pragma once
// This file is where you choose the machine type, by including
// one or more machine definition files as described below.
#ifndef MACHINE_FILENAME
// !!! For initial testing,…
-
Home user directories are somewhat standardized across OS' and can be used to create/reference a directory used for quickload. This would require some additional changes to how quickload works, like s…
-
On the Mac at least, this menu option exists and should do something-- at least link to www.watercolorbot.com or to the github page for the project.
oskay updated
8 years ago
-
I've been having an issue getting the servo to respond. So far, I just haven't been able to get any movement out of it unless I upload different arduino code to test with, and I'm hoping you might be …
-
In Eggduino.ino the microstepping is already set to 16 microstepping.
I also have pulled all three MSx pins high on my breadboard. Still I get very jittery and stepped vertical lines. I use A4988 driv…