-
Hello,
first of all, thank you very much for your great codebase! It helped me a lot so far on my own project. I am new to working with IMU's and Pose Estimation filters, so I do need some help and…
-
`CoreClocks` provides the resulting frequencies of the clocking configuration. But often that's not sufficient to understand or debug it.
Being able to see the actual divider and clock mux choices wo…
-
Thank you for your work with the MAX2870. I am working with your example2870. I believe that I have good communication between the UNO and MAX2870 (see MAX2870 Read STATUS.jpg)
![MAX2870 Read STATUS]…
-
Hi there, Thanks for the great library!
I'm new to python and MicroPython, but I've been messing around with your code, and think I've discovered a bug. It seems that when operating in quadrature …
W3MBG updated
11 months ago
-
Build firmware and device database from this JSON:
```
{
"target": "kasli",
"variant": "saymamaster",
"hw_rev": "v1.1",
"base": "master",
"rtio_frequency": 150e6,
"peri…
-
The existing PWM implementation is fixed to 1kHz and uses the _Fast PWM_ mode which isn't phase- nor frequency-correct. This is rather useless for applications like controlling a Servo where an exact…
Rahix updated
3 years ago
-
This works fine on my ATS20+ but the battery divider is already installed to pin A1 on ATS20+ and not pin A2, changed in _defs.h_ to _"#define BATTERY_VOLTAGE_PIN A1"_ and the charging indicator work…
-
I added some code lines to increase the flexspi2 clock speed to 132 Mhz. The chip supports up to 133 Mhz.
` const float clocks[4] = {396.0f, 720.0f, 664.62f, 528.0f};
// set clock speed for P…
-
In the Tides manual, it mentions that there is a Clocked/PLL mode accessible by pressing the Range switch for one second. This doesn't seem to be working in the VCV Rack version, nor is there an opti…
-
Hi. I need help setting up the keyboard frequency divider. I have already using two dividers in the ma35d1.dtsi file:
```
keypad: keypad@404A0000 {
compatible = "nuvoton,ma35d1-kpi";
reg = …