-
#### Description
I want to make a VMC machine with fully closed loop system using industrial servo. At present I believe CNCjs + g2Core doesn't give a fully closed loop experience. However, I feel …
-
I have a Synthetos TinyG v9 board153v9k PCB, and I would like to put the latest g2core firmware on. Is this board supported as a target? Do I need to use the g2 firmware, or the original TinyG firmw…
-
Could you implement jerk control or some jerk relief by adding some intermediate point (or more) in the trapezoidal profile of acceleration?
I think something like acceleration is a part (example 1/3…
-
## Feature request
Add a configuration option to change the length of jog commands sent when clicking and holding on the jog buttons.
I think the move length might be currently hardcoded to 1/500t…
-
Hello,
Got a weird stuff...
Compiling g2 OK as an elf file.
Using bossac on Widows 10 to upload firmware lead to an error message after a second:
**"flash operation exceeds flash size"**
Tried se…
-
After a few days of fail and error to connect the arm with my desktop, I hope you can help.
I used the arm before and everything works out fine, he did what he should do but now, I don´t even get …
-
#### Description
Want to use PS3 controller with desktop CNCjs.
#### Versions
- CNCjs: 1.9.x
- Node.js: 6.x
- NPM: 5.x
#### How Do You Install CNCjs?
- [] NPM
- [X ] Download the CNC…
-
#### Description
I recommend bumping the Node Version to **16.x** on the below guide, as older ones are unsupported and don't run properly anymore.
https://cnc.js.org/docs/rpi-setup-guide/ (It r…
-
I tried to use my newly-functional spindle control with chilipeppr and TinyG2 and ran into the problem that it implements the jogging as recommended on https://github.com/synthetos/TinyG/wiki/TinyG-Fe…
-
I have a Hitachi WJ200 VFD running my gantry mill. The closest input that the vfd will accept is a variable frequency PWM signal. I'm running TinyG2 Master and the SpindlePWM output is fixed frequency…