-
2022 what a year to alive!
RX32F103CBT7 datasheet partially in English
MS32F103C8T6 58 pages datasheet in Chinese
MG32F103C9T6 datasheet in Chinese
FCM32F103CBT6 you can guess
are you still h…
-
HW info:
- Holtek HT32F52352 (Cortex-M0+)
- Macroblock MBI5042GP LED Driver
- GigaDevice 25Q40CT 4Mbit SPI Flash
Tasks:
- [ ] Add photos
- [ ] Add schematic
- [ ] Write firmware patch
- …
-
First, thank you for clipping the SV06 and investing time.
Unfortunately, no connection is possible.
The USB connection is shown with **ls /dev/serial/by-id/** as **/dev/serial/by-id/usb-1a86_USB2…
-
I compiled the project on both macOS and ArchLinux, but could not flash successfully. The device could be discovered successfully. However, I am getting error on `get_status` after downloading consist…
-
**The problem you're addressing (if any)**
The chip GD25Q256D - found on some NovaCustom NV4-ADL devices - doesn't work on RTE, while it does work with the CH341A programmer.
**Describe the solu…
-
I have AMD Vega 56 (GV-RXVEGA56GAMING OC-8GD rev 1.0) that doesn't have signal nor fan spin on system startup.
![https://www.igorslab.de/en/custom-rx-vega56-benchmarks-review-2/2/](https://user-ima…
-
## Introduction
Users downstream of Zephyr have faced with name conflicts problems between existing sources, they are not allowed to change and sources from the Zephyr ecosystem that they don't wan…
-
HW info:
- Holtek HT32F1654 (Cortex-M3)
- GigaDevice 25Q40CT 4Mbit SPI Flash
- 3x Macroblock MBIA043GP (1 per channel)
CN2 header:
pin 1: 3v3
pin 2: SWDIO
pin 3: SWCLK
pin …
-
Using either `sipeed-rv-debugger` or `jlink` (J-Link EDU Mini in my case) as _upload_protocol_, it fails with the following log on a Sipeed Longan Nano:
```
Open On-Chip Debugger 0.10.0+dev-00911-gc…
-
### Is your feature request related to a problem? Please describe.
The stock firmware for the Kobra 2 Neo is atrocious, and very difficult to use. Anycubic has not released any updates, and many feat…