-
the Photon Workshop's infill is like that of the fdm printers. It is not an infill like the one generated by z suite or chitubox. The infill does not allow for workshops it does not allow a correct…
-
### Cura Version
5.5
### Operating System
Windows 10
### Printer
modded Tronxy X5SA-400
### Reproduction steps
Place large part on build volume
Infill : ~30%+, it works at 25% but takes a whil…
-
### Description of the bug
Trying to slice a model with different infills and pattern, bugged on 2.6 alpha, but ir's ok on the 2.5 version.
Slicing at 25% gyroid with box at 85% rectiliniar modiffie…
-
I just synced my files to github branch Slicer-v2. Some notes:
- The 3d viewer is a previewer and renders 8x8x8 areas as 1 voxel (for speed and memory consumption)
- The slicer is very slow and has…
NardJ updated
6 years ago
-
**Application Version**
4.1
**Platform**
Win10x64
**Printer**
Cr10 S
**Steps to Reproduce**
Try to load my project and slice
**Actual Results**
The slicing bar goes to 1/4 and then it…
-
1.42.0 b2 win64
Rectilinear support infill uses straight lines which tend to bend in large areas. If you switch to wavy line it will make walls much more sturdy (see the image). It will preserve ea…
-
### Version
version_2.1.0-485-g050a9adf3
### Operating system type + version
OS: Mac OS Mojave 10.14.6
### Behavior
So I built the slicer for mac os following the instructions provided. When …
-
A new setting called "better bonding" is found under "External perimeter first" section.
We have tried hundreds of settings combination and found out that this particular one is the only which is a…
-
It will be nice to have the ability to checkmark selected settings for these to be visible for the user at all times on main slicing workspace. before longs prints i spend time opening all right pane …
-
In early 2018, Slic3r's 3D honeycomb infill pattern was updated to only alternate the print direction after the current layer of cells is completed, as opposed to changing direction every layer. This …