-
Hi im having a matrix displaying image with a blan link in the middle because of hub75 E-Line.
Im curious why since i tried all options with the active adapter that this repository suggest @hzeller…
-
Hi
I've received my kit from Makerfabs today, flashed the firmware and connected to wifi. The unit appears to be working but the only colour displayed is red and the display is very dim.
Have I …
-
Thanks for this unique library. I have the following setup:
- P2.5 128x64 1/32 panel with E line. This module seems to be new and it is not the typical combination of two 64x64 modules as it has a s…
-
This is starting to get annoying...
I get output on them after sending the fm26126A init sequence, but the output is all wrong given the line addressing having changed again. It seems that you only s…
-
**FPP Version and Hardware**:
Example: FPP 5.2 on Pi 4 w/ 3 port matrix hat
**Describe the bug and Steps to reproduce**:
Configure single panel with 128x64 1/32 scan, apply, and try and use d…
Marx1 updated
2 years ago
-
I tried several sceens running a simple sketh to light up all pixels in Green then Red, then Blue
I cant get the green to fill the whole screen, red and blue work fine. Also, i can light up any pixel…
-
There are many cameras that grab pictures immediately after initialization, and there will be an unstable picture situation, ex. a full-green or black frame.
How about adding a method to keep the c…
-
Same issue will affect this library, reference: https://github.com/hzeller/rpi-rgb-led-matrix/issues/746
Potential fix required before using: .begin() -> https://github.com/mrfaptastic/ESP32-RGB64x…
-
Hello, I started tinkering with this library the other day with a 64x32 panel I had. Thanks for the hard work! :) I got a new panel today and tried the pattern_test and pixeltime examples. pattern_…
-
Hi,
I'm using an RPi 3B+ connected to a 64x64 panel via an active adapter board. I'm using a 5V 15A supply to this.
On the adapter board I have a jumper to enable P8 and another which ties P4 to…