-
### Is your feature request related to a problem? Please describe
The H5 MCUs, specifically the STM32H562RG, makes a good candidate for a high performance, and cheap, flight controller MCU with up-…
hydra updated
4 months ago
-
Hi dear,
Does free version of i3c_slave_design provide the function of HJ?
I try to modify the parameter of ENA_IBI_MR_HJ to 5'b01000, ENA_TIMEC to 6'd0(due to we do not have design of time cont…
-
Hi @Nitsirks , @calebofearth ,
We have encountered a testcase hang when RISCV core tried to access UART/QSPI registers, due to below tie-offs in caliptra top. We have not defined CALIPTRA_INTERNAL_…
-
In some cases when reading from the STC3100 registers, they are read as 0xff.
When reading from the STC3100, need to validate that the transaction is good.
This is a general I2C issue that there is …
-
Here we explain that the more the UVM `run_phase`
-
### Board
ESP32-S2 based
### Device Description
Multiple I2C devices
### Hardware Configuration
GPIO 11 & 12 connected to I2C
### Version
latest master (checkout manually)
### IDE Name
1.8.19…
-
We have hooked up the i3c_slave with denali master. For I3C transfer, NXP I3C can get dynamic address assignment from master. However, while I3C master issues write transaction to NXP I3C slave, I3C s…
-
Run in the follow problem on my mac (Sonoma 14.6.1).
Would appreciate if there are way to work around it.
Thank you!
```
EPII_CM55M_APP_S % make
...
arm-none-eabi-gcc -mthumb -mcpu=cortex…
-
### Provide a general summary of the issue here
Assume that on one page a user is allowed to type 3.000.000,25 for a German formatted number and then on another one they are only allowed to provide…
-
Power:
- [x] Check for short circuit on VBUS rail
- [x] Check for short circuit on 3.3v rail
- [x] Power device via USB without battery attached
- [x] Check 3.3v rail voltage
- [x] Check 2.5v sta…