-
## Current Behavior
The motor does NOT spin.
## Steps to Reproduce
1. Connect the configurator
2. Select Outputs tab
3. Configure Motors IDLE power to 15%
4. Enable 'I understand the risks…
-
Hi,
I am currently planning working on those topics related to Mission planner tab in Inav Configurator :
## **DONE :**
- [x] **All waypoint type** : [**DONE**] : see related PR #1231 and …
-
If you want to use the configurator on your phone or tablet you can do it using an app: SpeedyBee. (https://www.speedybee.com/speedy-bee-app/)
Available for Android and iOS, I think it is the best,…
-
Build: Latest build of qGroundControl available on website.
FC: FuriousFPV F35 - Inav 1.9.1
Receiver connection: Crossfire full module tx, micro receiver
Connection to FC: Bluetooth via cross…
wx4cb updated
2 years ago
-
In HITL with real FC and SITL, there will be randomly a "cannot arm, waiting for GPS fix" bug even if everything shows full 3D lock. Restarting everything will usually make it go away, but in SITL thi…
-
Im try: 1.92, 2.1 f/w.
I need mavlink from air to ground.
Its work if TX f/w not sbus (cppm/frsky).
On sbus TX pin ground module send zerows.
e32-868t20s air and ground, im try f/w for 20s and 30s…
-
## Current Behavior
Apparently some SD Card models block usb init and/or raise cpu load.
Multiple issues have been reported recently:
- https://github.com/iNavFlight/inav/issues/7707
- https://g…
-
Has the code signature changed from 'Ernest Stepanov (BTPSFW65UC)' to none for the latest version of inav-configurator?
-
When connected to Inav 2.5 when I delete blackbox log the screen says may take up to 20 seconds then once you click confirm the small box goes blank and doesn't erase the log without letting it stay b…
JCFPV updated
3 years ago
-
## Current Behavior
When using the new Magnetmeter page to set the direction of a BN880 it is incorrect and 90 degrees out
## Steps to Reproduce
1. calibrate mag
2. open magnetometer page an…