-
Google pays to enable open source hardware to be fabricated for free:
https://developers.google.com/silicon
Has anyone tried having this fabricated on that? If yes, how did it perform?
ryao updated
3 months ago
-
I found that the kintex7'dbs exist in prjxray-db,however symbiflow's cmakelist didn't use kintex7? whether the reason is the loss of primitives in some IP source such as iob18(in the dir of xc/common/…
-
I have purchased DMA for the XC7K series, models XC7K70T and XC7K325T respectively, but I am not sure if it is compatible with PCilech FPGA firmware. I am a beginner, please forgive my ignorance.
-
Just installed this toolchain via the snap installer (Ubuntu 22.04.03) and it seems to have failed to set up prjxray in the snap.
I've tried this for the demo projects and the same problem appears in…
maij updated
9 months ago
-
Hi, everything compiled successfully.
This is the command I ran:
`python3 -mfasm2bels --connection_database ./mydb.db --db_root /home/pc-5/Desktop/fpga_bit_to_verilog/f4pga-xc-fasm2bels/third_par…
-
I have ported litex-board to a K7325T based board. I have checked many times that the pinout is correct. But the DDR3 ram randomly fails. Sometimes when it passes the boot memory check, then it goes s…
-
Free and open source FPGA toolchain for AMD/Xilinx Series 7 chips
- [NLnet project](https://nlnet.nl/project/Kintex-nextpnr/)
- [source code](https://github.com/openXC7/nextpnr-xilinx)
- [unf…
-
I'm attempting to build the blinky-qmtech project from the demo-projects repo, and while it works fine on my Mint 20.3 (Ubuntu 20.04 derivative), the build fails on Mint 21 (Ubuntu 22.04 derivative - …
-
_This issue was automatically created by [Allstar](https://github.com/ossf/allstar/)._
**Security Policy Violation**
Project is out of compliance with Binary Artifacts policy: binaries present in sou…
-
thanks in advance
the phy layer of jesd204b is missing form this rep.
PHY: (?)
PRBS7/PRBS15/PRBS31 to check link integrity.
8B/10B encoding
32 bits interface
Artix7 support
Kintex7 support (C…