-
```
What steps will reproduce the problem?
1. Tweak the Make file atmega88 entry to lower the clock speed to 8Mhz
2. omake atmega88
3. use AVRDUDE to set fuses to Lilypad 8Mhz standard: DD,E2,04 (same…
-
```
What steps will reproduce the problem?
1. Tweak the Make file atmega88 entry to lower the clock speed to 8Mhz
2. omake atmega88
3. use AVRDUDE to set fuses to Lilypad 8Mhz standard: DD,E2,04 (same…
-
```
What steps will reproduce the problem?
1. Tweak the Make file atmega88 entry to lower the clock speed to 8Mhz
2. omake atmega88
3. use AVRDUDE to set fuses to Lilypad 8Mhz standard: DD,E2,04 (same…
-
I noticed at the bottom left of the tool bar arduino-create-agent--> open debug console in chrome, it has a textbox and a send button. If you enter
```
list
```
It gives a list of connected d…
-
### Describe the problem
I have the following setup: https://github.com/arduino/arduino-ide/pull/1132#pullrequestreview-1031068976
When I start the application I see the following errors logged:…
-
Hi, I tried making your project and when I run your code I got this error: (no clue what to do)
I also had little trouble loading libraries but I fixed that. Other than that I havent messed with orig…
-
I have a breakout for the ESP32-WROVER which has enough pins to make a 5x5 grid without a multiplexer. How could I use this library with such a setup?
-
Everything is working great but it's not capturing caps or special characters...it's just logging as if the shift key wasn't pressed...am I missing some setting I need to specify in the code to enable…
-
When the first OTAA join fails, the Badgerboard library states:
> Lora: Adding sensitivity: SF 9
> LoRa: warning. Spreading factor not set!
> LoRa: power not set!
> LoRa: datarate not set!
Sa…
-
Hi Michele
I'm attempting a build of the mini4wd chrono for our local club and I have
some questions. I have some basic understanding of electronics, but I need
clarification on the wiring diagram…