-
Hi,
I have a question about using str2str. Could you please explain it for you.
The str2str help says the following:
The input stream can be serial, tcp client, tcp server, ntrip client, or
file…
-
**Is your feature request related to a problem? Please describe.**
Not a problem, but a different use-case that would make some problems go away.
Currently, RTK with eg. the F9P is possible (ros n…
-
**Is your feature request related to a problem? Please describe.**
Support sending streaming RTCM corrections to the device from a ROS topic.
ROS [NTRIP Clients](https://github.com/LORD-MicroStrai…
-
Many people use RTK2go.
RTK2go bans IPs that connect to their caster without sending GNSS data. If your antenna becomes blocked, or you have a flaky USB connection, or any other GNSS hardware issue…
-
Hello,
I run rtknavi on two versions b33 and b34, how ever as soon as rtknavi receives corrections from CORS server, glonass satellites turn to grey(inactive) leaving only gps and therefore the solut…
-
Hi. wonder if its possible to use an exsisting ntrip stream to get into rtkbase, convert it to MSM4 and send it out to the WWW. (i want to convert a running RTCM stream with MSM7 to MSM4 with less dat…
-
hi everone,
I have a Mti-680g and I tried connect ntrip_client. I applied ( https://xsenstechnologies.force.com/knowledgebase/s/article/Using-an-NTRIP-client-with-the-Xsens-ROS-driver?language=en_U…
-
Hi any ideas on way this map view is not working thanks
-
dear all. if i choose rtk2go in the ntrip client settings, i immediately get corrections. if i set it up with working swipos account, the client connects successfully but doesn't get any corrections. …
-
The high-frequency topics are being buffered/clustered at 100hz.
here is an example with an unmodified driver with the provided launch file:
- `/imu/acceleration` is about **55hz**
- `/imu/time_ref…