-
## Issue Description ##
X440 configured with CG_400 FPGA Flavor does not properly advertise supported link modes which does not allow for receiving NIC or switches to auto-negotiate to 100 GbE Full D…
-
Hi, I have 6LBR setup on a Raspberry Pi. I have tried and found great success following the documented approaches whereby at least one of my mesh's nodes is attached to the RPi as a SLIP radio.
Howe…
-
### Hardware
ESP32-C3
### Firmware version
2.4.7
### Application version
2.4.7
### What happened? What did you expect to happen?
So, I have ordered those two cards and proceeded t…
-
@cassininazir @rmalina @amb141330 Just an idea, nothing serious, but I thought I should bring this to your attention.. maybe CD could be a remote resident... ??
EXTENDED deadline - May 22, 2016
OPE…
-
Dear all
We have performed some test here in Belgium and we have a big problem.
A/C= Transceiver Hytera PD-685 or RD-785
B/D= Transceiver Like TYT MD-380 MD-390, Retevis.
X= Hotspot using (…
on4wx updated
7 years ago
-
While building the code with Radio type as X310 we observed error as Invalid Radio type . Due to this i modified if Condition to support X310 Ettus Hardware in Build.sh . After this modification i was…
-
GNU Radio has its own bundle system, Python Build Overlay Managed Bundle System: https://github.com/gnuradio/pybombs - should try it out and investigate how it compares versus these Homebrew formulae.…
-
Has anyone got the python example scripts working?
Installation etc was not smooth but I have it in a state where SoapySDRUtil --find sees the Cariboulite and the basic transmit / receive example…
-
Hi,
I am very impressive of your work to manage bare-metal Allwinner T113.
As is documentation very limited regarding peripherals it's amazing how you were able to write such laconic code.
**So…
-
Dear Martin.
I wonder whether you would kindly implement a support for the Omnia SDR transceiver into your rtlsdr driver.
The Omnia SDR
www.omnia-sdr.com
is a short wave HAM radio SDR transc…