-
### Feedback
The instructions for getting esphome installed on an ATOM Echo tell you to install the CH342 driver:
```- In the dialog, select the CH342 driver, install it, then **Try again**.```
T…
-
### Is your feature request related to a problem?
@lhespress (and @chshu) not sure if should post a request here or zigpy-espzb repo at https://github.com/lhespress/zigpy-espzb
Duplicate/cross-p…
Hedda updated
2 months ago
-
When printing remotely we can't interact with prompts on LCD That can block remote print job on crash etc.
We need to have GCODE that sends over serial contents of the LCD and commands for operati…
-
## Feature request
**Is your feature request related to a problem? Please describe.**
I have a Navio2 RPI Hat. While trying to set up Remote Control for the hat, I tried connecting my ELRS recei…
-
I suggest that we add the ability to forward ports via the web interface and have the ability to scan for Wi-Fi networks via the serial console and web interface. Because the router could be remote an…
-
Research cellular receivers that we could buy for Pi. This would allow us to SSH to the boat while it is on the water and lets us reboot the boat or send shell commands to the boat. This would also le…
-
Problem can be reproduced in case of multilink with at least two links. Persist option must be enabled.
### How to reproduce:
There are two hosts, each has two serial interfaces. ttyp1 of Host1 co…
-
Working on a Pi4 that was running 7.x Master but just today updated and now says v8.x - Master - 21
but on a Pi 3b+ with a new img install of v8.x - Master - 21, it will not show the Login / Password…
-
### The problem
Hello, since upgrading to the latest version of both Home Assistant Core and Home Assistant OS the Vicare integration no longer works. I tried removing it and reinstalling it. It does…
-
### Description of defect
When checking out a project with "mbed-tools deploy", the [remote "origin"] section in the config file of the git project checked out is limiting the fetch specifi…