-
The latest Arduino 1.8.19 needs a new attribute line in the library.properties
paragraph
Example
paragraph=Arduino MODBUS Driver for the Renogy Rover 20A/40A Charge Controller
-
Hi
thanks a again for the great software.
having a question but could only raise an issue and no discussion..
Did you try to change settings via the modbus interface already?
Thanks Th…
-
I'm currently trying to use this library but I'm getting this error:
```
>> from solarshed.controllers.renogy_rover import RenogyRover
>>>
>>> controller = RenogyRover('/dev/ttyUSB0', 1)
>>>
…
-
Hello, I'm the owner of an off-grid cabin with a newish setup of these items. For better or worse, I spent quite a bit going "all in" on Renogy, only discover nothing provides any sort of remotely usa…
-
I have this working with Renogy controller and works great! thank you!
I see it can also monitor batteries BMS but i have Xiaoxiang BMS will this work with that BMS? I did try to connect to the batte…
-
Hi Joshua,
thanks again for your great software.
Having a understanding issue:
what is the base of those 2 fields and the meaning?
Please confirm my understanding:
pvCurrent -> solar cha…
-
Firstly, thanks for creating this. I'm having issues setting it up however and having no joy getting up and running so far. What I've done:
* confirmed that USB serial is seen in the root console (…
-
Hi there ,
Renogy rover 40a
Raspberry Pi 4
homemade cable
4 100w panels
I currently have solarthing working with couchdb and reporting up to pvoutput.
I would like to also use graphql , which …
cguay updated
2 years ago
-
Hi, i have followed the instructions very closely but i must be doing something wrong. This is the 2nd install ive done but both fail at this stage. here is the result when i enter the command
```
…
-
Hi! This is incredible work and I'm in the process of integrating it to a larger RAK WisBlock based project. I am curious about where you found the settings commands documented. Also if you had writte…