-
```
What steps will reproduce the problem?
1. have ffmpeg version 1:0.11.1-1 installed
2. try compiling boblight
What is the expected output? What do you see instead?
i expect it to compile, instead …
-
-
Hi !! I'm really new with pycom and I don't know how to decribe my problem with technical words so I'll try to tell you what happenned:
1. I installed pymakr
2. I connect for the first time a pyco…
-
The recent i2c/spi driver changes and corresponding board level support has been a solid step forward, but one small thing we've lost is the configuration of on board I2C devices. In many cases the I2…
dagar updated
3 years ago
-
I'm testing an Here2 Module in UAVCAN mode on a Pixhawk4 Board.
The PX4 version I'm running is the stable 1.9.2 and I have the UAVCAN_ENABLE parameter set to 2.
PX4 can successful recognize the Gps …
-
I port your SD based bootloader firmware to IAR MDK, and flash it to pixhawk board
But The program will dead after update new firmware (release )1.1.3...
the boot log of uart7 output stop at 5883…
-
**Describe the bug**
I build the circuit basically according to the scheme provided here. Instead of RGB LEDs I changed the code a bit to drive three white LED strips and change the brightness for ea…
-
The gamma correction calculation formula in [colorview.ino](https://github.com/adafruit/Adafruit_TCS34725/blob/master/examples/colorview/colorview.ino) seems not right.
`for (int i=0; i x = pow(x, 1/…
-
There is a discussion on the Discord channel about the Neopixel led on the ESP32-xx boards.
Espressif provides a function for the onboard Neopixel led when Arduino code is used, but also a common Neo…
-
On M4 feather Express, I get a REPL output of
```
code.py output:
Traceback (most recent call last):
File "code.py", line 34, in
ValueError: D11 in use
```
My Circuitpython Code is :
``…