-
I have the problem that my Kostal Plenticore Plus can only process the BYD battery via the RS485 interface. Unfortunately, the byd modbus that is already included in the software does not work. what c…
-
Hi,
This hardware configuration is possible with this code ?
```
RS485 devise IN/OUT -> ESP1 ----> wifi ----> ESP2 -> RS485 IN/OUT
|
| modb…
-
I try to get RS485 with the [Waveshare CAN/RS485](https://www.waveshare.com/wiki/RS485_CAN_CAPE) to work on the latest Debian Buster Image (Debian 10.0 2019-07-07 4GB SD IoT) but had no success so far…
Bouni updated
3 years ago
-
Downloaded your release 1.0.1, unpacked.
Setting Configurator (I want only read BMS settings, no invertor running):
- General tab - selected this folder as Instalation path in Configurator, set OS…
-
I'm querying the jkbms via bluetooth every minute and besides being slow sometimes it gets stuck, so I tried to switch to the solution presented by the solar assistant
![image](https://user-images.gi…
-
hi all, i used the firmware version alpha 3.2.47, in that cant able to enable (tx enable) in the pin assignment preset... can anyone suggest idea for this pin to enable to work for wifi to 485
-
I try to get your firmware working. i'd like to access my power meter with my smart home. i tried latest release, but i couldn't configure the tx-pin. i never could save the configuration until i used…
-
Hi,
would it be possible to somehow use RS485 to make use of this module or some other? I would like make use of single pair cable that I have and achieve simple communication between two endpoints. …
-
I decided that ethernet was too much trouble.
I have the Solaredge rs485 adapter board installed.
If I execute python /home/pi/solaredge/semonitor.py -o /mnt/nfs/test.json -s [inverter_sn] -t 4 /dev…
-
I am looking at some industrial humidity/temperature sensors that use the Modbus protocol (RS485) such as this: https://www.vaisala.com/en/products/instruments-sensors-and-other-measurement-devices/in…