-
I am trying to build the` stm32-uart-echo` example but not sure what I am doing wrong. I get the following error during the `swift-build` step:
```
:0: error: unable to load standard library for tar…
-
I am using NuttX 12.2.1 on an stm32 nucleo f103rb with a SIM7600G-H to try to use an AT command (via the LTE library).
This is how I am using the AT command:
int customhello_main(int argc, char *…
-
**Caution**
The Issues are strictly limited for the reporting of problem encountered with the software provided in this project.
For any other problem related to the STM32 product, the performance, …
-
Please also provide support for STM32 chips.
For example, the STM32F103C8T6 microcontroller has USB connectivity capability. It would be great if your library supports this microcontroller as well.…
-
**Describe the bug**
Under enough USB traffic load, the implementation of `usb_dc_ep_write()` in the stm32 USB driver can cause data corruption. This is because the data pointer it accepts is stored …
-
I'm trying to run the [stm32wb mac_ffd example](https://github.com/embassy-rs/embassy/blob/main/examples/stm32wb/src/bin/mac_ffd_net.rs) on my NUCLEO-WB55RG board but get stuck [here](https://github.c…
-
Hi
In most STM32 families is ErrorStatus defined as followed:
typedef enum
{
SUCCESS = 0U,
ERROR = !SUCCESS
} ErrorStatus;
but in stm32u0xx.h is it reversed.
typedef enum
{
ERROR…
-
**Describe the bug**
I am using Zephyr 3.7 RC2 but the issue is vissible also with 3.7 RC1.
I am trying if everything still works for the STM32WB55 device. I am using STM32 Nucleo WB55.
I checked …
-
随着代码结构的完善,越来越希望代码更加智能化,调参的步骤越少越好,要是啥也不用调就更好了。。。
回忆起以往看过的代码,感觉智能化第一步就是搞定flash读写。有了flash之后,一切都变得很方便了。
比如每辆车的电机安装方式不一样,那么云台中间位置就不一样,如果有了flash,直接运行校准程序,云台左右分别碰到限位开关,自动计算出中间位置,pitch轴直接用手扶正,靠陀螺仪判断是否水平…
-