-
We're using a BMI323 IMU, connected over the I2C0 bus. This module needs to be able to communicate with it and return relevant data.
Also consider any calibration that is required for the module to w…
-
# installed stm32duino library
arduino-cli config add board_manager.additional_urls https://github.com/stm32duino/BoardManagerFiles/raw/main/package_stmicroelectronics_index.json
arduino-cli update
…
-
The cart includes a [ST Micro STM32L4 Discovery kit IoT node](https://www.st.com/en/evaluation-tools/b-l475e-iot01a.html).
We need some kind of lab content for this board. Open for ideas on what t…
-
Sto usando un RPi4, devo usare una venv per le librerie ma niente da fare.
I'm using an RPi4, I need to use a venv for libraries, but I'm not having any luck.
-
I am trying to run one of the EPD examples on a few different STM32 boards and am not able to build.
- Arduino board: **STM32F405 Feather**
- Arduino IDE version (found in Arduino -> About Arduin…
-
Hi @Proto-App I will give the datasheet link
1.SG3525
https://pdf1.alldatasheet.com/datasheet-pdf/view/23561/STMICROELECTRONICS/SG3525A.html
2.SG3524
https://pdf1.alldatasheet.com/datasheet-pdf/vie…
-
Hello all,
Recently, STMicroelectronics updated STM32F4 HAL driver [1]. Some of the APIs are changed, like CAN. Do you plan to update included sources listed here?
[1] https://www.st.com/resourc…
-
### Description
Requesting HAL support in Marlin for STMicro's STM32 Nucleo-64 development boards with STM32G4 (STM32 G4) 32-bit MCUs.
https://www.st.com/resource/en/user_manual/dm005563…
-
### Discussed in https://github.com/stlink-org/stlink/discussions/1381
Originally posted by **DF4OR** March 26, 2024
Hi.
Beginner here.
I have sucessfully used other boards (e.g. Nucleo-F09…
-
Conformal Coating is desired. How do we handle initial programming if boards are coated at the point of fabrication?