-
When animating a toolpath with multiple steps, it would be convenient to be able to pause the animation between steps. This would let you fast-forward through the steps that are working and allow you …
-
Have downloaded the latest version suggested by Maria, after installation the program runs very slowly. Also after creating a design and filling out the Fabrication inputs, I get nothing no toolpath c…
-
```
What steps will reproduce the problem?
1. Create circle shape with diameter > 20mm
2. Convert circle to sketch
3. Select created sketch and 3 mm Carbide Slot Cutter
4. Add new milling operation: p…
-
Hello,
I would like to test the continuous (vase) printing toolpath (for shell shapes).
I see a method called slicer::make_spiral_face, that could do this job, but it does seem to be used today.
…
-
As the title states, the machine stops about a third of the way through the job... It's repeatable.. Even using CNC3D commander I'm getting the message "your job has completed successfully"... right o…
-
If I have a closed path that is at least .25in wide, and a tool that is .25in wide, no toolpath seems to be generated (or, at least, drawn). If I drop the tool size to less than 1/2 of the cut width,…
-
Hello @jya-dev
Thank you for your contribution. I have spend a few hours poking around your source code and using the debugger to try and find where I can extract the list (x, y) values for each l…
-
It would be great to be able to suspend automatic toolpath scaling and centering in preview after every change in NativeCAM.
Imagine changing some parameter of a tiny detail you zoomed in...
I t…
-
When opening an existing laser project file, the toolpath setting checkbox for „constant power mode“ is always shown as activated regardless of the saved value. It‘s possible to deactivate the checkbo…
-
As per #1 clipping works out great using OCCT. To fully utilize the advantage of using wires and edges (to preserve arcs), one needs to be able to get segments of wires/edges between two known points.…