-
What do I input as the port if it's connect through usb on linux?
EDIT: Nvm, figured it out :I
-
Thank you again for your nice product and software! I am trying to get the X2 do what I want :)
I noticed that the X2 rotates extremely fast (probably around 20 Hz, but surely above 10 Hz, although…
-
Hi..
I am far from having your expertise, so I don't want to be presumptive. However, I recognize LDS-006 output data very similar to that of a different LIDAR device typically used on vacuum clean…
-
git clone https://github.com/YDLIDAR/YDLidar-SDK.git
cd YDLidar-SDK/build
cmake ..
make
sudo make install
Trying to follow the instruction to build the SDK for ROS driver from here. https://git…
-
upon make there are MULTIPLE errors of the form:
> In member function ‘int ydlidar::core::base::Thread::join(long unsigned int)’:
/home/ubuntu/YDLidar-SDK/./core/base/thread.h:118:18: warning: fo…
-
I'm going to do ros2 with ydlidar x2.
I was going to install slam_toolbox to map it, but I couldn't, so I was advised to install rf2o_laser_odometry. I followed your advice,
```
ros2 launch ydlidar…
feelj updated
3 months ago
-
Processing /root/YDLidar-SDK
Preparing metadata (setup.py) ... done
Building wheels for collected packages: ydlidar
Building wheel for ydlidar (setup.py) ... error
error: subprocess-exited-w…
-
Hello kostaskonkk,
I was interested in your package
But after installing and running it according to the README
I found out that it doesn't work
I have run "roslaunch ydlidar lidar.launch"
An…
-
Hi, I meet this problem when i run the following command and I have tried some methods but no one works.
ros2 launch ydlidar_ros2_driver ydlidar_launch.py
[INFO] [launch]: All log files can be f…
-
Hi all, I cannot get any results from my GS2 lidar when I run the test program. It says the health is good but no distance values are printed. Please see screenshot.
This is the latest SDK buil…