-
Hallo nochmal,
ich habe jetzt die Verbindung hinbekommen. Jedoch sind die Abfragen wohl nicht erfolgreich, bzw. die Werte falsch. Die Daten für die Meter aus der Doku sind wohl für die dreiphasigen…
-
Hi all,
i setting up the Container, and MQTT, all works as aspected, but no values are send.
![grafik](https://user-images.githubusercontent.com/77094944/149277948-f60582dc-4181-4c15-a053-2f40f6…
-
### Describe the bug
The MPPT´s show 0.4V higher charge voltage than set in the app, the settings of serial battery or elsewhere. Why is that?
![IMG_3074](https://github.com/Louisvdw/dbus-se…
-
Hi, I have PHP installed in the server and if I load the page from the DisplayMonkey folder it works great. If I let DisplayMonkey show the page in the main display, the script shows as text. How ca…
-
Hi. Hope someone can help me. The board works fine, which mens i can upload new firmware and i can control fans and other hardware devices using PrintRun for Mac. But when i try to control the stepper…
-
I would also like to contribute something to this DIY project as I'm using it for my own DIY battery (48V 400Ah; 16S2P [one controller w/ 32 module boards]).
On the attached picture you can find a …
-
### Describe the bug
We use a dynamic electricity tariff and control the charging and discharging of our battery via a node red flow. If the battery is to be charged to 100%, we set the minimum SoC t…
-
Sorry if this is the wrong place, but I dont know where else I can comment on github.
I just got this running with the SOK 48V 100Ah battery and Home Assistant and it works first try.
Thanks a lot!
-
Ich habe die Software auf eine NodeMCU mit 4GB-Speicher laufen. Nach dem Flashen war das System sehr schnell, aber seit dem er die Verbindung zu den zwei NEEY's aufgebaut hat, reagiert er sehr langsam…
-
### Is your feature request related to a problem? Please describe.
Einer der häufigeren Gründe, warum der Wechselrichter abschaltet, ist die Meldung
```
19:00:40.728 > [ 10225.822] DPL: power mete…