-
Anyone using the DFH.fm BTT 3m CAN bus cable ?
Looking to CAN my M8P v1.2 with cb1 and a EBB36
-
I buy 3 of this motors from BTT, installed on X and Y axis. after calibrated it working, then next time power on printer, LCD only show message Waiting Motor Power and it try some movement but still …
-
Is there a good way to check to see if the setting for TRINAMIC_R_SENSE is changed from the default 0f 75 mOhm after the firmware is built? I am using the BTT 5160 Plus external driver modules and th…
-
Hi..
I have an SKR 1.4 Turbo with detached sd-card connector bought from Aliexpress BTT Global store, I am trying to get it replaced but I don't know if I will succeed.
I have successfully uploaded …
-
Hello.
i have this board and the BTT pad 5 unit. i have installed manjaro ARM in the 16GbeMMc
"all" works as spected. ETH(gigalan, this is fixed in my unit https://github.com/bigtreetech/Raspbe…
-
Hello!
I've set up 1min. for screen to dim, but everytime the layer progress is updated the screen wakes up from idle state.
Is it possible to set the screen to wake up only for a touch or knob m…
-
It would be awesome to have some event to tell when a click has occurred (not just left/right click) and the number of fingers used to do it.
My use case: I basically moved my shortcuts from BTT to…
-
I have issues with CANbus and even after going from v1 board to v2 and now using CANbridge mode it's still happening. From research, it looks like 32-bit Bullseye is solving many of the issues. Is the…
-
Hi,
Looking for what all to use. Gonna get a BTT Mini V2 for this and would hook it up over USB to Klipper so as regular MCU.
I think your config has also very specific parts in it for your setup …
-
Tried following along with the tutorial (on youtube) and the `btt.addEventListener()` click function for the back to top demo doesn't work in Chrome or safari. Tried downloading straight from github …