-
Hi,
I'm building a robot using an Arduino RP2040 Connect. I want to control the robot using ELRS. I found this project which uses an Pi Pico [CRSFJoystick](https://github.com/mikeneiderhauser/CRSFJ…
-
added nightly crsf lua on ethos 1.5.0 on x20 tx module settings works fine but try alter rx through lua x20 goes into emergency mode
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Current Behavior
Other similar issues suggest that the default S3 provider (v3) has CORS configuration i…
-
Hi gys, yesterday I flashed my Jumper T20 Gemini and the RP4TD receiver with the newest firmware (3.3.2) with the configurator 1.6.1 via Betaflight pass-through.
I went flying on the same place lik…
MR444 updated
6 months ago
-
Id: "adc56e2b-d25d-4d1a-b38a-17b3a47edba4"
When flashing to 4.5.0 I have No Gyro or accel Flashhobby F405 Board (https://www.banggood.com/30_5x30_5mm-Flashhobby-F405-MPU6000-F4-OSD-Blackbox-Flight-C…
-
## Current Behavior
If I disable pitmode by switching to a power level on the VTX using the button, then I am able to switch between power levels 1 (25mw) to 4 (400mw) from INAV. What INAV is unable …
-
### Apache Airflow version
2.2.5
### What happened
We are giving a link to the Airflow webserver running in a docker container from our UI and when the Airflow UI is opened via that link it errors …
-
rx-R9MM-f103rb-elrs-bl-v1.1.01-@19066cb.elrs
receiver outputs sbus instead of crsf.
mLRS.lua: Edit Rx: Out Mode is fixed to sbus (disabled).
-
Hello! I have a reverse question. I have a flight controller and I need to transmit control signals to it from STM32 via UART. I realized that CRSF is good for this task. Please tell me, is it possibl…
-
### Describe the bug
since #3726 the fport telemetry is no longer working
As you can see, the entry for the telemetry protocol is missing in the cloud build -> [buildlog](https://build.betaflig…