-
### Bug Description
All motors function correctly except motor connected to E0 which only moves in one direction.
### My Configurations
[Configuration.zip](https://github.com/MarlinFirmwa…
-
Just downloaded the latest firmware 2.0.6 for my SKR Mini E3 V2.0 board (posted a couple days ago) and the unit is much louder than the 2.0.x bugfix drivers and feature set seems a lot smaller in the …
-
I've been trying to get the TMC5160 driver running with a nice clean starting point but Motate's API appears to be async-only.
I understand that this makes a lot of sense for certain applications b…
-
I have some problems with EEPROM
there is what pc displays me when I try M50X codes
>>>M501
SENDING:M501
echo:EEPROM version mismatch (EEPROM=ERR Marlin=V64)
echo:Hardcoded Default Settings …
-
### Bug Description
通过串口发送M17指令,电机并没有使能。
发送M18指令,电机可以去使能。
marlin 2.0.5.3 固件中没有添加L6474的使能指令。
```
/**
* stepper/L64xx.h
* Stepper driver indirection for L64XX drivers
*/
/**
…
-
### Description
1. [Print any Gcode with dimensions bigger than 20x20 cm]
2. [Wait for hanging SKR board - either in G29 or first layer]
3. [if it will survive somewhat 3rd layer it mostl…
-
### Description
After homing the X-Carriage rams into the edge and the extruder starts extruding vast amounts of filament.
This only happens if I start a print after a print has finished. Canc…
-
Just a note, this will also work for the tmc5160 as they share the same logic. Good idea if you added it.
-
Hi, is there a way to upload firmware through USB? I see some guides on other 32-bit boards saying that the controller's SD card slot will appear as SD card device on Windows 10 - copy and paste firmw…
-
### Bug Description
If i using the libs TMCStepper and U8glib together the bulding process **fails at linktime**.
Building with TMCStepper alone is Ok
Building with U8glib alone is Ok
I test…