-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
To replicate:
* Factory reset
* Look at startup output
[ 1025][D][esp32-hal-adc.c:305] __analogReadMilliVolts(): Creating cali handle for ADC_0
[ 1033][D][Begin.ino:66] ident…
-
I noticed in values.yaml, it's still pointing to 2.1.0 even though 2.1.1 is mentioned as the latest release. Is this accurate?
https://github.com/djkormo/adcs-issuer/blob/ae5eb471c11eebe3aaf45129e8…
-
-
PRESENCE_12V line ( currently connected to PA1 , which is a digital-only line ) should be connected to PF0 instead ( which can function as an ADC )
-
Customize how long the generated certificate is valid.
https://github.com/search?q=repo%3Adjkormo/adcs-issuer%20NotAfter&type=code
-
Hi Aaron,
I hope this message finds you well. I have a couple of technical questions regarding electrical impedance tomography (EIT) that I hope you can help with.
First, after the boundary volt…
-
While using the adc_dt sample with an Atmel SamE51 board with multiple adc inputs, I noticed that all channels were reading from the same mux input on the ADC.
Inspecting adc_sam0.c reveals that the…
-
Get ADC running and check we can see the signal from the R820
- [x] singled ended
- [x] calibration
- [ ] differential input
- [ ] interleaving
- [ ] oversampling
- [ ] samplesize
Currently using 8…
-
Hello,
I'm constantly running up against the ADC hangup issue.
I've tried a few ways to try and implement a general reset as suggested in section 5.61 of the [User Manual](https://www.infineon.com…