issues
search
uob-hep-cad
/
uob-hep-pc072
DUNE MIB
CERN Open Hardware Licence Version 2 - Strongly Reciprocal
0
stars
1
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
All I2C current/voltage/temperatures sensors should be powered from MP3V3 , not just the temperature sensor.
#39
DavidCussans
opened
5 days ago
0
learnt to read this time
#38
oxfpete
closed
5 days ago
0
dcdc_2v5_pg line should be moved from PE6 to PF1
#37
DavidCussans
opened
5 days ago
2
PRESENCE_12V line ( currently connected to PA1 ) should be connected to PF0 .
#36
DavidCussans
opened
5 days ago
3
"finished" but needs silks and traces tidying still (sorry!)
#35
oxfpete
closed
5 days ago
2
uTCA handle almost shorts to C51. Move C51
#34
DavidCussans
opened
5 days ago
1
Schematic hierarchy updated
#33
oxfpete
closed
5 days ago
1
Few subtle mods to layout
#32
oxfpete
closed
1 week ago
2
Work in progress PCB related
#31
oxfpete
closed
1 week ago
0
Need a check over - there is a back up of the schematic sheet with lots of changes
#30
oxfpete
closed
1 week ago
0
Mux task remains
#29
oxfpete
closed
2 weeks ago
0
Two issues remain open but quite a bit of schematic change
#28
oxfpete
closed
2 weeks ago
0
Some changes implemented in schematic
#27
oxfpete
closed
2 weeks ago
0
An initial mod to see if this project can be pulled
#26
oxfpete
closed
2 weeks ago
1
Replace board-sense diode (D12) with Schottky version. Move R102 so that diode can be completely decoupled from MMC uController
#25
DavidCussans
opened
1 month ago
4
Add 12V power connector to allow easy powering on bench
#24
DavidCussans
opened
6 months ago
2
Replace DNF resistors R81,R83 with 100nF capacitors
#23
DavidCussans
opened
6 months ago
3
Add fuses to main 12V and 3.3V management power line from backplane
#22
DavidCussans
opened
6 months ago
4
Alter RESET line on MMC uController so that uController can be programmed with MIB out of crate
#21
DavidCussans
closed
3 weeks ago
1
Replace 0.1-inch header for MMC uController programming with 0.05-inch header (to match modern cables)
#20
DavidCussans
opened
6 months ago
2
Allow AVR programming cable to override RESET line from uTCA backplane
#19
DavidCussans
opened
6 months ago
2
Remove D-FF from two upstream SFPs. Add mux to allow either direct or via D-FF on third
#18
DavidCussans
opened
6 months ago
4
Feature/cb pro files
#17
DavidCussans
closed
9 months ago
0
Feature/front panel ethernet
#16
DavidCussans
closed
11 months ago
0
Final artwork that was sent for manufacture
#15
DavidCussans
closed
1 year ago
0
Manufacturing artwork 01
#14
DavidCussans
closed
1 year ago
0
Dgc pcb edits 3
#13
DavidCussans
closed
1 year ago
0
Schematic fixes 3
#12
DavidCussans
closed
1 year ago
0
Magnus pcb edits 3
#11
DavidCussans
closed
1 year ago
0
Schematic fixes 2
#10
DavidCussans
closed
1 year ago
0
Magnus pcb edits 2
#9
DavidCussans
closed
1 year ago
0
Schematic fixes 1
#8
DavidCussans
closed
1 year ago
0
Magnus pcb edit 1
#7
DavidCussans
closed
1 year ago
0
Drcs and rooms again
#6
DavidCussans
closed
1 year ago
0
Added long net names at top level to make schematic and PCB easier to…
#5
DavidCussans
closed
1 year ago
0
Set ROOM property to invisble on a couple of straggling pages. Printe…
#4
DavidCussans
closed
1 year ago
0
Add rooms to schematic
#3
DavidCussans
closed
1 year ago
0
Power supply mods 2
#2
DavidCussans
closed
1 year ago
0
unfinished changes to power supplies to test merging sch changes in git
#1
DavidCussans
closed
1 year ago
0