-
Hallo @pdp7
I am trying to read the position of the linear actuator with the ADC port of Beagle Bone Blue. I am importing Adafruit_BBIO.ADC as ADC and then I am setting up the ADC also, but I am …
-
**Describe the bug**
If I disable the Wi-Fi AP mode service and afterwards I reboot my board, the virtual network interfaces on the USB connection are not properly setup (no IP addresses are set) and…
-
Hi!
After many attempts with the various answers already given, I have to resign myself and ask the community for help.
My project uses Ubuntu 18.04 with the kernel 4.14.44-ti-r51 on a Beaglebone …
-
Raspberry Pi running gateway at commit 8a594194c71d14e8b89ade6875995880b96b7c35
things-url-adapter addon at 0.4.5
Using test code from https://github.com/cdelston0/gateway-test
Test command is:…
-
I've gotten the Debian Stretch system installed and booting on two Beaglebone Green Wireless boards, but when I switch the kernel from 4.4.26-ti-r59 to 4.9.0-ti-rt-r13 the wl18xx module doesn't materi…
-
LaRC is contributing a Beagle Bone Linux PSP, which is based on the CFS 6.4.1 version of the PC-Linux PSP. It is now present in the cfs_psp project tree under the "ic-LaRC-beaglebone-linux" branch on …
-
I've been using a custom cape designed by a user with debian 8 and the 3.8 kernel branch just fine for the last year. Recently, I decided to try to use it in Newer Debian releases (I've tried both scr…
-
currently the call to `with open("/sys/bus/nvmem/devices/0-00500/nvmem", "rb") as eeprom:`
requires root privileges.
this leads to scripts that use Blinka and are run on a BeagleBoard require root (…
-
On full cycle of boot until the network-watchdog-initiated-reboot below. As can be seen from the ntp updates, it did have a working dns resolving for a while.
The problem is shown in the dnsmasq li…
-
EDIT: Duplicate of https://github.com/arduino/Arduino/issues/3712
---
hey,
after arduino.cc is supposed to have cancelled it's Arduino Tre project (no longer listed on products page), so regretta…