-
After letting the Degu unit run on battery power for an extended period, the Degu unit shuts itself down itself due to low battery (output says ~2.2V, read using the [battery example code](https://git…
-
Hi, I build firmware for rp2040 with make raspberrypi_pico_default - it's OK. I convert .elf file to .uf2 with elf2uf2 tool.
Then, I take pi pico board, connect to this board module G-91 with MPU925…
-
It would be nice to be able to read the pressure/temperature data from the BMP280 from rcpy. (Yes, you can get temperature from the IMU, but that's a junction temperature for calibrating biases, whil…
-
#include
#include
#include
#include // Библиотека для работы с барометром https://github.com/adafruit/Adafruit-BMP280-Library
#include
#define BMP_SCK 13
#define BMP_MISO 12
#define BMP_…
-
**Problem description**
When subscribing to continuous sensor updates, SensorOutputWriter sleeps for a fixed amount of time, then sends out the most recent sensor data. This sensor data may be exactl…
-
Debug level from my sensor:
airRohr: NRZ-2020-133/DE
mounting FS...
opened config file...
parsed json...
output debug text to displays...
Connecting to XXXXXXXXXX
..................SNTP synce…
-
Hello bro, is it possible to use BMP280 Barometer sensor for altitude hold instead of ultrasonic sensor
-
您好, 我在STM32F412的板子上使用该软件包进行bmp280读取测试, 发现读出的数据和我用bmp085相差较大(bmp280为95, bmp085为103, 且bmp085为以前的量产产品), 为做验证, 我用裸机直接写了个驱动, 读取的数值与bmp085一致, 故猜测问题应该发生在该软件包内, 但我尚未发现问题所在.
不知是我使用不正确, 还是有其他原因, 是否有其他攻城狮遇到过?
-
FYI, there was a bug fix for AHT10 inside ESPHome 2024.3.1 (released on 27th of March 2024)
https://esphome.io/changelog/2024.3.0.html#release-2024-3-1-march-27
https://github.com/esphome/esphom…
Hedda updated
4 months ago
-
Regarding to the Infineon datasheet for the baro sensor DPS310 the default I2C address is 0x77 .
https://www.infineon.com/dgdl/Infineon-DPS310-DataSheet-v01_02-EN.pdf?fileId=5546d462576f34750157750…