-
Joysway J4C12R receiver, which are included with RTR Joysway boats. Binds successfully using the Joysway protocol.
However, there is no signal output on pins 2 and 3 on the receiver when outputs a…
-
Can this library also be used to control an ESC? The goal is to remotely operate an RC car using a Raspberry Pi and the Adafruit 16-Channel PWM Servo Hat. I’ve successfully used this library to contro…
-
Hey cpopp, I'm trying to built this arm, using an esp8266, and mg995 servos, But having an issue with servos not responding, only ticking. This is the first time I've tried to use the mg995 on the chi…
-
Using Johhny-Five and the Arduino, control the servo motors so they can rotate a specified value (degrees won't be determined until the mount with gears is 3D printed).
Requirements: #4, #6
-
https://cad.onshape.com/documents/fb589a3e676b39b1967ba147/w/428973a6add4b0521f1726b1/e/8eb87c02286d9a7042cda816?renderMode=0&uiState=66fdfb7a7bbca77f77fb921e
-
Tarkoitus olis rakentaa jonkinlainen "kassakaappi" jonka lukitus aukeaa avainlätkällä ja tämän jälkeen kansi aukeaa automaattisesti.
Tässä siis perusidea ja kun se on saatu toimimaan, lisäämme laatik…
-
Not sure if this is possible or not, but more PWM pins would be nice. Seems like this lib has it working: https://github.com/xtacocorex/CHIP_IO
I'm not sure how to interface it with Node, though.
-
It is possible to extract code coverage from Rust code (https://github.com/xd009642/tarpaulin, https://medium.com/@Razican/continuous-integration-and-code-coverage-report-for-a-rust-project-5dfd4d68fb…
-
Would like the ability to set a pin to an 'analog' value rather than just on/off. See:
https://learn.adafruit.com/adafruit-arduino-lesson-3-rgb-leds/theory-pwm
-
Hi, I'm Luca, I've been working on my antenna track project for several months, now that it's time to program it I came across your project.
So I'll show you my results, 3D modeling of the antenna.…
LZ-3D updated
1 month ago