-
### Cura Version
5.7.2
### Operating System
Windows 11
### Printer
N/A
### Reproduction steps
- Start Cura after freshly installing it.
- Click through the screens until you rea…
-
afin de palier au bug temporaire du power panic, il convient de placer un M500 après le G29 dans le gstart de cura by dagoma
cela peut se faire manuellement lors de l'installation de cura ultimaker (…
-
Maybe it's a stupid question but in the description you mention Cura 5.3 is currently not working.
Does this mean any newer version is affected as well?
Because at the moment I am using Cura 5.4 and…
-
How can we get this working with Cura 5.0?
https://github.com/Ultimaker/Cura/releases/tag/5.0-beta
The plugins location has changed to "C:\Program Files\Ultimaker Cura 5.0.0\share\cura\plugins"
…
-
Feature Request
===============
**Problem**
When minimal layer print time cannot be respected, print can become ugly because of too much heat in the part and therefore produce deformed prints.
…
-
Hello,
There is a cura profile to load, but no instruction on which printer we must use as a base.
Is it possible to add that instruction ?
NB : with loading on a BIQU B1 in cura 4.8.0 we got…
-
### Cura Version
5.7.0 beta1
### Operating System
Windows 10
### Printer
Creality Ender 5 S1
### Reproduction steps
Imported SingleObject-FasterPrint.STL with current slicing settings (see atta…
-
Adding tabs changes the dimensions of the model and scale % in the scale tool, even if only the model is selected. This is consistent across Cura 5.7.0 and another Cura-based slicer with an older Cura…
-
### Cura Version
5.7.2
### Operating System
Windows 11
### Printer
Generic
### Reproduction steps
```
pip install conan==1.60.2
conan config install https://github.com/ultimaker/conan-config.…
-
Cura has a Special Mode called Surface Mode. I'd love to get the same thing in PrusaSlicer. It will help me immensely with some models I'm trying to print.
One addition to Cura's Surface Mode that …