-
Do you think it would be possible to include displaying NXDN metadata (especially User ID)?
-
Firmware 2.27
The volume knob steps don't allow fine enough adjustment. Even the lowest volume on the "indoor" setting can be too loud in some quieter environments, and there is too large a jump fr…
geary updated
4 months ago
-
Hi!
Great talk @ SDRA...
It would be nice to support DMR/DStar/YSF modes in QRadioLink. So how do we go about bridging MMDVM ?
As you have ruled out mbelib, I guess another option is based …
-
I have noticed that the Dashboard for the GB7YJ DMR repeater (I am only a user, not the repeater keeper) sometimes shows an incrementing TX Duration even though that specific transmission has stopped.…
g0hww updated
3 years ago
-
I would like to be able to use my HT to connect to a Discord voice channel. I figured the hotspot could be helpful in this regard. I don't want to link the discord to any existing DMR networks, but ha…
-
At this moment XLX interlink uses D-STAR headers only to pass traffic between reflector. If user has more than one ID a reflector system on the other side may use another ID than used on original call…
-
hi
what are these errors that i'm getting while decoding DMR? you haven't explained them in the wiki:
+DMR MS VC2 e:5m7r7r
+DMR MS VC3 e:7r7m7r
+DMR MS VC4 e:7r7r7m
+DMR MS V…
-
# TODO
- enable/disable bootline1 override
- edit bootline1 override
- prefill bootline1 override 1/2 DONE
- enable/disable bootline2 override
- edit bootline2 override
- prefill bootline2 override 1/…
-
Consider adding the OpenGD77 CPS to the supported import files generated by cps-import-builder. The OpenGD77 project can be found here: https://github.com/rogerclarkmelbourne/OpenGD77CPS. @rogercla…
n7ekb updated
3 years ago
-
I had a few times where the radio locked up.
Had to remove the battery as it would not even turn off.
Unable to reproduce though!