-
## Specifications for new sensor / switch / or other device ...
- manufacturer: Somfy
- model name: Smoove io
- pictures of the device:
![image](https://user-images.githubusercontent.co…
-
## Specifications for new sensor / switch / or other device ...
- manufacturer: Velux
- model name: Window Blinds remote / io.homecontrol
- pictures of the device
![image](https://user-…
-
Until 20 October 2022 all worked fine. We had a power outage for some time at that day. After restarting, I got the following error:
0|Landroid | DEBUG: Connect to worx....
0|Landroid | ERROR: Cou…
-
I had to adjust line 170 to make the module sending analog data via COE to CMI.
Problematic is the usage of semicolon as a delimiter between value and type causing $type always to be uninitialized wh…
-
Hi guys.
As the initial dev of this seems to be more or less dead I made a Fork of the project and made it work.
Here is a Link:
https://github.com/Superwutz/supoxy
I will try to keep in up …
-
Hallo,
nachdem ich die 3 Dateien nach /opt/fhem/FHEM kopiert und fhem neu gestartet habe, erhalte ich folgende Fehlermeldung im Log:
`2022.10.11 20:44:55 1: PERL WARNING: Bareword found where op…
-
Hallo zusammen
ich habe seit langen mal wieder FHEM als DockerContainer installiert, da ich die Module hier gefunden habe.
Ich habe einen Grohe Blue Home
Wie kann ich das JSON-Log als Readings anze…
-
**I have unsuccessfully sent various MQTT commands over the network:
Example:**
`homeassistant/climate/midea_ac_18691697794845/cmnd/IRhvac`
payload:
`IRhvac {"Vendor":"SAMSUNG_AC","Power":"On","…
-
## Expected Behavior
In der Beschreibung des genannten SET Befehls fehlt ein Hinweis, dass die Freuqenz des Sendens beim Senden unabhängig von dieser Einstellung verändert werden kann und dies bei …
-
I am using a Philips HUEBridge V2 and have connected it with FHEM 30_HUEBridge.pm.
Then I configured it in FHEM with "define Gartentorswitch HUEDevice sensor 5 1". This runs via 31_HUEDevice.pm.
W…