-
I propose adding two features to spindle_control.c:
1: Slowly ramp to pwm setpoint. Most PWM motor controllers will faithfully attempt to instantaneously start or stop a motor, causing massive curren…
-
When I boot with `sdtv_mode=3` or use `tvservice -c "PAL_M 4:3"` I get 720x576 at 50Hz, but it should be 720x480 at 60Hz like NTSC, that's the correct format for PAL-M.
-
I have read somewhere on the forum, that it is preferred to disable the DLPF filter in the MPU an use the software IIR LPF filter (https://github.com/TauLabs/TauLabs/blob/next/flight/Modules/Stabiliza…
-
Hello Mr Spiliotis,
I would like to use your Theta forecast R code you attached and compare it with the "forecTheta" library from Fiorucci, Louzada and Yiqi (2016) - and more specifically the DOTM.…
-
As per @DonvdH request [there](https://github.com/jeffmer/TTGO-T-watch-2020-Micropython-OS/issues/14#issuecomment-1712789058)
Thanks a lot!
-
In the readme file, you write:
> The stereo effect is a mild pitch-shift doubling to create a stereo image, applied in mid-side effect so that it cancels out when summed to mono.
How had it been d…
-
I stumbled upon an interesting bug. Linux is unable to boot if the memory size is above 512mb. In litex BIOS the whole ram passes the tests and its working but as linux start to boot it cant boot if I…
-
**Describe the bug**
With either `dtoverlay=disable-bt` or `dtoverlay=miniuart-bt` set in `usercfg.txt` (or `config.txt`) the bootloader does not initiate. After powering on the Pi, it is stuck a…
-
Good day,
I have Sipeed Tang Nano 1K (which is replacement for Tang Nano already supported in Litex) with GW1NZ-LV1QN48C6/I5 and BL702 usb-jtag
Here's its documentation https://wiki.sipeed.com/h…
-
This is part of my Faust code:
```faust
declare options "[midi:on]";
declare options "[nvoices:8]";
import("stdfaust.lib");
freq = hslider("v:Env1/[4]Freq1[midi:ctrl 45][scale:exp]", 400,40,10000…