-
Hi,
i am using a Zytemp TN168
(http://www.zytemp.com/products/tn168.asp). As shown on the Picture i connected it to a Mega 2560 Arduino Board. i used your new libs:
https://github.com/freetronics/…
-
**Original report ([archived issue](https://osrf-migration.github.io/gazebo-gh-pages/#!/osrf/gazebo/issues/2001)) by Nate Koenig (Bitbucket: [Nathan Koenig](https://bitbucket.org/%7Bc862cdd9-fcc8-4419…
-
Donnie suggested that they might be interfering with each other. I suggest setting up the headband in a place that it should see nothing. Find a motor that seems to be randomly twitching and unplug th…
-
At present, we have no direct way of measuring solar radiance (light intensity).
While the PV voltage loosely correlates with solar radiance, it cannot be relied on to measure the latter. Further m…
-
Prusa Research will NOT follow up these issues!
The maintainers of the "Community made" feature should/will react.
**Which Community made feature do you want to address?**
I have seen few users w…
-
What component do I need and where do I add it? to block the interference?
-
Add support to use ultrasonic and/or IR distance sensors for proximity detection. They can then be mounted under the hexacopter to improve accuracy when landing.
-
I used the following python code to try to open the binocular camera, the actual effect of opening only opened the right camera, and then the camera data is cut into two parts, I do not know the reaso…
-
I am using a GrovePi Plus HAT with several sensors attached on a Raspberry PI. The board has both digital and analog ports. I could readout the sensor values without any problem with previous OS versi…
-