-
Hi . I wired everything like shown up but get TMC Connection Error in Display. Checked via Pronter 3 TMC2008 get a Connection But the 4. Has bad Response All to low. Can sw Help pls . I used BT…
-
One of the Y axis moves slower than the other causing issues during prints. I have no clue where to go from here.
`/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https:…
-
Cannot get the TFT35 touchscreen to work with octoprint using a MKS GEN L?
When removing the touchscreen, octoprint works normally.
How to fix this problem
-
I'll try my best to explain this, the beta firmware you've provided, unless I've missed something, doesn't have the BigTreeTech 32 bit SKR V2.0 board, so I had to download the newest 2.0.9.2 marlin fi…
-
I made a post in the main branch of [Marlin](https://github.com/MarlinFirmware/Marlin/issues/22996) & another user [here](https://github.com/bigtreetech/SKR-2/issues/96) has a similar issue.
What I…
-
I was able to attach my PandaPi to my Openbeam Kossel Pro, and all that's left is configuration. However, whenever I run G33, it consistently errors out with either "homing failed" (if I don't home fi…
-
I try to send a file (a g-code) using web ui, but it is not able to write sd card (trying with differents sd card)....transfert is shown completed (100%), but no files are on the media, althought I ca…
-
I have made no changes to the configuration. I placed the proper config files in the proper places. I get an error log as shows:
Processing ZM3E2_STM32F103RC_USB (platform: ststm32@~6.1; board: ge…
-
Looking at the .cpp file, there this:
`uint8_t XNucleoIHM02A1::number_of_boards = 0;`
Does each "ACTION" in the .cpp file need to have an addition? And does a new initializer need to be created in…
-
## Introduction
Zephyr at present does not have a provision to control stepper motors. **Stepper Motor Controllers** do have a set of common functions which can be bundled together in a API as pres…