-
Steps to reproduce:
1. Login in the Viewer.
2. Click "Communicate"→"Gestures".
3. Try quickly and simultaneously pressing different types of gestures.
Actual behavior:
Crash the viewer after pressi…
-
Hi All,
I used to have a 1517+ 8 bays and unknowingly I purchased the card and realised laters that this won`t work due to the pcie being incompatible so I ended up getting an RS1221+ knowing tha…
-
Is there any undocumented flow for embedded FW development using a MicroBlaze inside the CL, with the AWS-FPGA HDK?
In my on-premise environment, using u200 card, and following the instructions fro…
-
### Environment
Second Life Release 7.1.11.11565212741 (64bit)
Release Notes
CPU: Intel(R) Core(TM) i7-5930K CPU @ 3.50GHz (3491.92 MHz)
Memory: 32610 MB
OS Version: Microsoft Windows 10 64-bit (Bui…
-
Environment
Both DeltaFPS (7.1.10.10800445603) and ExtraFPS (7.1.11.11565212741)
You are at 121.0, 110.0, 23.2 in Pasta Cake located at simhost-054bc31cb9bd66326.agni
SLURL: http://maps.secondlife.…
-
I'm trying to passthrough a graphics card. No vGPU, no mediated devices, just a plain old VGA:
```
00:02.0 VGA compatible controller: Intel Corporation CoffeeLake-S GT2 [UHD Graphics 630]
```
…
-
The M_10q series are DIRT CHEAP right now and make great HomeLab machines.
It would be great if we could expand your mod to get a second M.2 slot on these, and other Lenovo models as well.
I purch…
-
I purchased a Pioneer 1.3 bare board, and I am at a loss for how to get this thing to boot.
I have tried various combinations of the following RAM and boot media:
- 1 stick of NEMIX RAM MR25600-…
-
I have discovered that the new Raspberry Pi 5 should be compatible with the Blackmagic DeckLink SDI Micro card through the PCIe interface.
I am planning to order a couple of these cards to test with,…
-
I have tested the 3080 Ti on my Raspberry Pi 5 using Raspberry Pi's prototype PCIe adapter. It required an external power supply to feed that adapter and the card itself, and I had to install Nvidia's…