-
It looks like your GND and PWR planes are mostly empty. Not making much use of the 4 layers.
![image](https://user-images.githubusercontent.com/15166572/170220892-5a8b16a5-4741-45bb-a5cc-ae00e349f…
-
Request: Support for other delimiters like comma if we copy-paste tables to Spine DB.
Currently tab is used as a delimiter for copy pasting values to tables in Spine DB. For example, in the tutori…
-
Hi,
I have been working with sim868 facing issues to poweron / poweroff sim868.
It has been mentioned in datasheet that can power on SIM868 by pulling down the PWRKEY pin for at least 1 second an…
-
Using this as an example is it possible to validate input yaml files?
```yaml
hdmicec:
device_type: &device_type # List of allowed values
- TV
- STB_1
- STB_2
- DVR_1
…
-
```ts
const { pwr, gnd } = useConnections({ pwr: { voltage: "12v" }, gnd: { max_current: "1A" } })
const { Arduino, ArduinoPowerSupply } = useArduino({ power: "12v", powerConnection: pwr })
```
…
-
Automatyczne pobieranie źródła nie działa na plan-pwr.pl (przynajmniej u mnie), ale z kodu źródłowego wygenerował ładnie plan w przeciwieństwie do starego generatora. Kod źródłowy wysłałem mailem.
-
Hello again! For context, this post serves as a continuation of [a previous one](https://github.com/SysSec-KAIST/LTESniffer/issues/45) where I was attempting uplink decoding using a pair of USRP B205m…
-
Fabricate the internal PWR cable that goes from the power board (PB) to the RAT face.
There are 16 cables per box, 8 with a 6cm lengths and 8 with a 10cm length.
There 22 RATs total, 20 flight a…
-
I have 4 batteries, the master is US3000C and slave are mixed US2000C and US2000.
I have tried to use you sketch but the battery was not responding, then I connect directly to the console port using …
-
https://github.com/OpenPuya/PY32L020_Firmware
Hi, please add support for this new low power series