-
RaSCSI should be able to register subscribers and send notifications on certain events, to be handled by the subscribing clients.
The immediate use case is the OLED Screen, to replace the current ine…
-
# Info
- Which version of Pi are you using: 3B+
- Which github revision of software: develop
- Which board version:
- Which computer is the RaSCSI connected to: Ensoniq ASR-10
# Describe t…
-
# Info
- Which version of Pi are you using:
- pi@raspberrypi:~/RASCSI $ grep Model /proc/cpuinfo
Model : Raspberry Pi Zero 2 W Rev 1.0
- pi@raspberrypi:~/RASCSI $ cat /etc/debian_ver…
-
The bananapi cleanup seems to have inadvertently removed some of the code that builds and manages connections with Aibom and Gamernium rascsi board types.
These are board types that has an install …
-
# Info
- Which version of Pi are you using: Pi 3B+ with Raspberry Pi OS Lite (image from Github)
- Which github revision of software: 21.11.1
- Which board version: Full spec
- Which computer is …
-
SCSICD::OpenPhysical() is only called when the image filename starts with a backslash, but the code in SCSICD fails to open files starting with a backslash.
This already appears to be the case in v20…
-
This affects release 22.08.01 and older.
In BYTCHK mode rascsi does not compare but writes the data sent for comparison. This is not considered a serious issue because clients that use the SCSI VER…
-
I ordered some Bare PCBs of the rascsi from JLCPCB, and was checking the price and availibility of the other parts. I found that the SN74LS641-1DW is discontinued and very expensive, so went looking f…
-
This issue is to propose the removal of X68000 support from RaSCSI Reloaded.
It is unknown whether this functionality actually works and there is currently no known means to test it.
It would be…
-
# Info
- Which version of Pi are you using: Raspberry Pi Zero 2 W Rev 1.0
- Which github revision of software: v23.11.01
- Which board version: FULLSPEC
- Which computer is the PiSCSI connected …