-
When you put the LPC in flight mode with the RS41 disconnected (presumably also if the RS41 has failed) then the LPC reboots. I suspect this is due to a timeout in the serial read from the RS41.
-
The current peak detection approach is quite coarse and doesn't reliably detect the centre frequency of most radiosonde types.
We currently get around this by quantising the detected peaks to 10 kHz…
-
Hi,
Could you assign a new ID `NEVVMAN-1` and custom fields for it:
```
"NEVVMAN-1": {
"comment": "Nevvman's custom fw fields",
"struct": "
-
Basic idea behind this is that sondes that are high enough, aren't really that interesting in terms of hunting. A good station can "hang" to sonde that is "useless to listen" while that sonde being ve…
j0uni updated
10 months ago
-
devel20231110
After a gap of 20 minutes the last position/velocity was recycled and resent to sondehub.
frame 2101:
```
{
"software_name": "rdzTTGOsonde",
"software_version…
-
Hi!!
I have been getting the error below. I am running the dev-branch on myy own nanopore data. My input fastq files seem to be fine at a first glance. I am using very low quality thresholds in al …
-
Right now we just drop any data with no gps lock on the floor right away. There is some value in recording this data however, and even uploading it to SondeHub - *assuming* we record the fact that it …
-
Requested by Terry D.
-
Hi,
![image](https://github.com/projecthorus/sondehub-tracker/assets/4477734/b59331d7-ab1e-42fc-9a47-24524bf7e404)
Having most RS41's over here in the EU running 4fsk on 2 different frequencies a…
zanco updated
3 months ago
-
Requested by Terry D.