-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
I added a scanning procedure in the manager.py script under the set_servos function which breaks upon detection and reverts to track mode. However, the track mode has a default position where the obje…
-
Trying to use the DSM tools to setup Blade helicopters.
Radio: Taranis X9D+2019
EdgeTX: 2.10.5
DSM Tools: 0.59 (MIN)
Forward Programming:
* Setup script has no options for helicopter on v…
10man updated
1 month ago
-
I've connected exactly one Bioloid Dynamixel MX-28 servo to the ArbotiX controller. I know for a fact that the servo has ID 1 because I have written an Arduino sketch that instructs servo 1 to move, a…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
Is there support for PCA9685 i2C 16ch servo controller in your version of the phoenix code? Or maybe in the near future?
Will this also run on other arduino's than the teensy?
-
For applications like 3D printers and CNC machines, having a lookahead feature on the controller that can then send the next series of points to the servo could be neat.
Copper280Z has been playing…