-
Hi
I have with success programed my tang nano with your tool, both:
openFPGALoader -m -b tangnano impl/pnr/*.fs
and
openFPGALoader -m -b littleBee impl/pnr/*.fs
Give a successful …
-
Hello, I would like to know how to flash the docking station, whether when flashing the docking station, whether the docking station must be connected to the tang nano 20k module at the time of flashi…
-
Explore the options to use the BL702 onboard the TANG NANO 1k as a dual UART+JTAG. Compare the TANG schematich agaings the dual uart schematic on sipeed github.
Try to reflash the BL702 on board the …
-
Hi, if it's not boring for you, could you please convert this project to tang nano 9k (GW1NR-9C) ?
-
Broken link (404) in :
https://github.com/sipeed/TangNano-9K-example / README.md
at :
https://github.com/sipeed/TangNano-9K-example#led
"Demo project for drive LED and on board led. The relate…
-
Hi,
I uploaded the camera_hdmi example from here on Tang Nano 4K using GOWIN IDE. Uploaded into the embedded flash.
After uploading, I get some snow on the screen. After I press KEY2, I get some c…
-
Hi,
I'm getting started on FPGAs (apologies in advance for noob behavior).
I've bought a Sipeed Tang Primer 20k ( https://wiki.sipeed.com/hardware/en/tang/tang-primer-20k/primer-20k.html ) and I…
-
As we now have 2 versions with the PCM1802 IC intergrated directly for 2ch and 4ch, intergrating the extraction into the toolchain natively makes ease of use far better and streamlines workflow.
-
I'm looking to spool up teaching and turnkey starter kits of getting your feet wet in FPGA and my board of choice is the Sipeed Tang Nano, supported by the Apicula interface layer.
If you could add …
-
this dev board is hard to find and if you made an opl3 board this would be very hard to solder a port to a cheaper fpga would be very useful
what I am trying to say is that an fpga functioning iden…