-
This is following of [the discussion on openhab community](https://community.openhab.org/t/onvif-camera-sends-motion-detection-to-phone-but-not-openhab-trigger/120611).
@Skinah here is the wireshar…
-
### Describe the problem you are having
So, I have become absolutly dumbfounded over this, I have 24/7 recording setup, and it works all fine and well, but the files don't exist? Ive checked disk I…
-
### Description
Hello,
Thank so much for this amazing component. I managed to successfully integrate a C100 and C310 in my Home Assistant instance.
The only issue I have is that I can't seem to…
-
### Describe the problem you are having
I have two cameras, Tapo C200 ("inne") and Tap…
-
### Describe the problem you are having
I can't access HTTP API. Even with the port: 5000 defined in the add-on configuration.
Can't say I've noticed the error affecting the essencial functionalit…
-
### Describe the problem you are having
Hello
I have been running Frigate for a few months now but it is not for tracking people or cars. I use
it to track animals in my back yard. I have many.
I…
-
### Description
I have two Tapo C320WS cameras integrated in my Home Assistant.
Siren control does not work. Replies:
Failed to call service siren/turn_on. Error: Parameter to get/do does not …
-
Hello,
I have a Tapo C310 camera that I'm trying to get to work with the jeedom camera plugin, but I can't. I used the RTSP address you mention on the forum (rtsp://username:password@ip:554/stream1) …
-
### Description
Right after update to 5.3.0 and 5.3.1 the two cameras C420 and the hub H200 dont work anymore.
In the Integrations section, it says "Failed Setup, will retry"
In the logs I get t…
-
### Description
When I turn on my camera, the binary_sensor for motion does not always go off.
When the camera is switched on and detects movement, it is also not always the case that the sensor goe…