-
Dear, I am using a uno r4 wifi module to control 4 relays using the sinric pro functionalities.
When I compile the code (generated using the zero code in my Sinric Pro account) I get several errors…
-
Here is the detailed writeup:
https://www.elektroda.com/rtvforum/topic3996584.html
You can also see my pull request:
https://github.com/QuickSander/ArduinoHttpServer/pull/23
-
On the Uno R4 Minima and Uno R4 WiFi, pin 13 is made an output after reset, so if you do:
```
void setup() {
Serial.begin(9600);
delay(5000);
}
void loop () {
Serial.println(digitalRead…
-
I have been trying to use the SoftwareSerial library but get errors on the receiver. So I had a look at what it is sending and this is what I found. It looks like the Uno R4 is not sending the stop bi…
-
Unable to connect to a WiFi network with a name (SSID) that contains a space (e.g. "My wifi").
This happens on an Arduino Uno R4 WiFi board. The WiFi firmware is updated to the current latest (0.3.…
adgbu updated
8 months ago
-
The PFS_4* defintions have a typo which alias them back to the PFS_1* locations:
#define PFS_P410PFS ((volatile unsigned int *)(PORTBASE + **P100PFS** + (10 * 4))) // N/C - IRQ5
-
Hello Folks,
sorry to report back a very weird problem - I spent quite a bit of time getting this to run on the Arduno Uno R4 WiFi. Now I have it working, but am a lot perplexed.
Particularly, t…
-
Hi!
I am running the OscWifi example on my Arduino Uno R4 WiFi, and using your example maxpatch to communicate with it from my Mac. The issue is that the Arduino receives every message I send to it, …
-
When using sample_train i get the output :
`train--------------------------------------------------------------------------------
Command Format Error!
-------------------------------------------…
-