-
The original MKS TFT28 supports wifi using the MKS HLK-WIFI module.
Is this supported with your firmware?
-
Hello,
I found a bug in the last release. Anything is wrong with the manual move the extruders from the LCD display.
When I go to the move menu and select one of the three extruders many times the…
-
hi i made a 3d printer (old ender 3) i replaced the motors the drivers the MB the belts the hotend.
to
moter: 42BYGHW811 (from a old k8200)
driver: mks servo42c (X,Y and Z)
mb: ramps 1.4
belts:…
-
Add more tiles, more colours, background tiles etc.
-
If you use some sort of ramps throughout the terrain you'll soon run into limitations with fluids. Even though under water there is no problem was far as I can see, the problem arises at the shore.
!…
-
My dual external monitor does not have display adjustment buttons, but needs to be configured via a windows app. On my ubuntu machine, I use [xrandr](https://wiki.archlinux.org/index.php/xrandr) to do…
-
On melodic, and likely noetic as well based on a brief look, the roscpp [`PollManager::threadFunc`](https://github.com/ros/ros_comm/blob/melodic-devel/clients/roscpp/src/libros/poll_manager.cpp#L72) f…
-
Hellow!
I have arduino due + ramps fd V1.
I can compile marlin 2.0 and all works fine.
SD card work.
But I cant save eeprom on sd card.
Helm me please.
My config:
```cpp
//
// EEPROM
//
…
-
Алло акв47
Я также построил такой drawRobot для своей девушки и теперь хотел бы использовать ваш код.
К сожалению, это не работает на меня. То, что я сделал:
- Скачать ваш репо
- прошил код…
-
[//]: # "==Do not write above this line==
Instructions for posting issues:
(1) Review what is already there. Perhaps a comment to an existing issue would be more appropriate than opening a new one?…